--
Sahana
| To view the pdf or download please follow the link below: http://www.keepandshare.com/doc/view.php?id=1419143&da=y |
Why use a proxy server to get a different IP when you can simply mask it?
Question for Protocol Stack:
How does Real Hide IP protect from hackers?
Team members:
Rajavardhan
Rishikesh
Siddharth
Sriniketan
Rishabh
Transmission Control Protocol/Internet Protocol is the basic communication language or protocol of the Internet. It can also be used as a communications protocol in a private network (either an intranet or an extranet). When you are set up with direct access to the Internet, your computer is provided with a copy of the TCP/IP program just as every other computer that you may send messages to or get information from also has a copy of TCP/IP.
TCP/IP is a two-layer program. The higher layer, Transmission Control Protocol, manages the assembling of a message or file into smaller packets that are transmitted over the Internet and received by a TCP layer that reassembles the packets into the original message. The lower layer, Internet Protocol, handles the address part of each packet so that it gets to the right destination. Each gateway computer on the network checks this address to see where to forward the message. Even though some packets from the same message are routed differently than others, they'll be reassembled at the destination.
TCP/IP uses the client/server model of communication in which a computer user (a client) requests and is provided a service (such as sending a Web page) by another computer (a server) in the network. TCP/IP communication is primarily point-to-point, meaning each communication is from one point (or host computer) in the network to another point or host computer. TCP/IP and the higher-level applications that use it are collectively said to be "stateless" because each client request is considered a new request unrelated to any previous one (unlike ordinary phone conversations that require a dedicated connection for the call duration). Being stateless frees network paths so that everyone can use them continuously. (Note that the TCP layer itself is not stateless as far as any one message is concerned. Its connection remains in place until all packets in a message have been received.)
Many Internet users are familiar with the even higher layer application protocols that use TCP/IP to get to the Internet. These include the World Wide Web's Hypertext Transfer Protocol (HTTP), the File Transfer Protocol (FTP), Telnet (Telnet) which lets you logon to remote computers, and the Simple Mail Transfer Protocol (SMTP). These and other protocols are often packaged together with TCP/IP as a "suite."
Personal computer users with an analog phone modem connection to the Internet usually get to the Internet through the Serial Line Internet Protocol (SLIP) or the Point-to-Point Protocol (PPP). These protocols encapsulate the IP packets so that they can be sent over the dial-up phone connection to an access provider's modem.
NETWORK PROTOCOL ANALYZER
The packet analyzer (also known as a network analyzer, protocol analyzer or sniffer, or for particular types of networks, an Ethernet sniffer or wireless sniffer) is computer software or computer hardware that can intercept and log traffic passing over a digital network or part of a network. As data streams flow across the network, the sniffer captures each packet and eventually decodes and analyzes its content according to the appropriate RFC or other specifications.
USES:
The versatility of packet sniffers means they can be used to:
Analyze network problems
Detect network intrusion attempts
Gain information for effecting a network intrusion
Monitor network usage
Gather and report network statistics
Filter suspect content from network traffic
Spy on other network users and collect sensitive information such as passwords (depending on any content encryption methods which may be in use)
Reverse engineer proprietary protocols used over the network
Debug client/server communications
Debug network protocol implementations
NOTABLE PACKET ANALYZERS:
WIRESHARK:
Wireshark is a free packet analyzer computer application. It is used for network troubleshooting, analysis, software and communications protocol development, and education. Originally named Ethereal, in May 2006 the project was renamed Wireshark due to trademark issues.
Wireshark is a network packet analyzer. A network packet analyzer will try to capture network
packets and tries to display that packet data as detailed as possible.
You could think of a network packet analyzer as a measuring device used to examine what's going
on inside a network cable, just like a voltmeter is used by an electrician to examine what's going on
inside an electric cable (but at a higher level, of course).
In the past, such tools were either very expensive, proprietary, or both. However, with the advent of Wireshark, all that has changed.
Wireshark is perhaps one of the best open source packet analyzers available today.
SOME INTENDED PURPOSES:
Here are some examples people use Wireshark for:
• network administrators use it to troubleshoot network problems.
• network security engineers use it to examine security problems.
• developers use it to debug protocol implementations.
• people use it to learn network protocol internals.
The following are some of the many features Wireshark provides:
• Available for UNIX and Windows.
• Capture live packet data from a network interface.
• Display packets with very detailed protocol information.
• Open and Save packet data captured.
• Import and Export packet data from and to a lot of other capture programs.
• Filter packets on many criteria.
• Search for packets on many criteria.
• Colorize packet display based on filters.
• Create various statistics.
Assumption: Error free communication channel
The sender in this protocol simply retrieves a packet from the network layer, copies it into a frame, and then transmits it. After transmission, the sender busy waits until an acknowledgement is received from the receiver, then the loop starts over again.
The receiver simply busy waits until a frame is received. Once a frame is received it passes the data packet to the network layer and sends an acknowledgement for the frame it just received. It then loops back to busy waiting and the process continues until the End of File is reached.
In this protocol, there can only be one outstanding frame at a time so no sequence numbers are required and the acknowledgement the receiver sends back to the sender is nothing more than an empty frame, as there is no other possibility then acknowledging the only frame sent. Another frame will not be sent until this acknowledgement is received.
The Stop and Wait protocol was very easy to implement and runs very quickly and efficiently. It solves the problem of congestion, as only one frame is outstanding at any time, frames cannot be lost due to congestion and the receiver will not be swamped by the sender.
The problem with it is that it assumes an error free communication channel and in the real world, such a channel does not exist. It is easy to see that if a frame or an acknowledgement gets lost or damaged, a deadlock situation will occur where neither the sender or receiver can advance, and they will be thrown into infinite loops.
In computer networks, a proxy server is a server (a computer system or an application program) that acts as an intermediary for requests from clients seeking resources from other servers. A client connects to the proxy server, requesting some service, such as a file, connection, web page, or other resource, available from a different server. The proxy server evaluates the request according to its filtering rules. For example, it may filter traffic by IP address or protocol. If the request is validated by the filter, the proxy provides the resource by connecting to the relevant server and requesting the service on behalf of the client. A proxy server may optionally alter the client's request or the server's response, and sometimes it may serve the request without contacting the specified server. In this case, it 'caches' responses from the remote server, and returns subsequent requests for the same content directly.
A proxy server has two purposes:
To keep machines behind it anonymous (mainly for security).
To speed up access to a resource (via caching). It is commonly used to cache web pages from a web server.
A proxy server that passes requests and replies unmodified is usually called a gateway or sometimes tunneling proxy.
A proxy server can be placed in the user's local computer or at various points between the user and the destination servers or the Internet. A reverse proxy is a proxy used as a front-end to accelerate and cache in-demand resources (such as a web page).
What is Remote login?
Hello friends in this post i am going to tell you one of the most important concepts of networking that is Remote Login. Here in this post i will tell you what the Remote Login is, how it works and many other things related to it.
In simple words Remote Login means to access other computers on the network or on the other network by the use of telnet or rlogin command. In other words we can also say that Remote Login means to access native computer from the other computer on the network when you are connected to the internet. Generally there are two protocols that are used for Remote Login:
1.RLOGIN Protocol Overview
2.TELNET Protocol Overview
For using the TELNET command for remote login the syntax is:
-->telnet hostname
After connecting with the remote host, you will be prompted for your login id and your password just as if you were logging on via a terminal on that system.
For using the RLOGIN command for remote login the syntax is:
-->rlogin hostname
This command provides an advantage over the telnet command that is here in this command you can specify a username on the command line, and can set it up so that when you rlogin to a host you will not be prompted for a password. Rlogin assumes you wish to login to an account with the same name as the account you are presently logged in as. If you wish to change this, use the -l option.
How Desktop Sharing Works
Remote Login
Let's say you're preparing a huge PowerPoint presentation for a big meeting on Friday. All of the PowerPoint files and PDFs and images that you want to use in your presentation are saved on the hard drive of your work computer. Thursday rolls around and you wake up with a nasty stomach virus. You don't feel well enough to go to the office, but you need to finish that presentation. Here's where remote login can help.
Until recently, virtual private networks (VPN) were the only way to remotely access work files from home. But VPN access isn't the same as accessing the hard drive of your work computer. VPN gives you access to the local area network (LAN) at your office. With VPN, you're only able to access your PowerPoint presentation files if you've saved them on the network, not just on your computer's hard drive.
Remote login, however, uses simple desktop sharing software to give you a "remote control" for accessing your computer -- and all of its software and hard drive files -- from any Internet-connected device anywhere in the world.
Remote login works exactly the same way as desktop sharing. In desktop sharing, there are two separate parties: the host computer and the remote user. To share a desktop, the host computer allows a remote user to view the contents of the host computer's desktop over the Internet. The host computer can also hand over keyboard and mouse controls to the remote user. With remote log-in, your home or work computer is the host and you (in this case) are the remote user.
Remote login requires three basic components:
1. Software download
2. Internet connection
3. Secure desktop sharing network
Computer Communications Designed by Sourav Roy Copyright@ Sourav Roy